3 Reasons Youre Not Getting Saab 93 Key Fob Isnt Performing And The Best Ways To Fix It

How to Replace a Saab 9-3 Key

The Saab 9-3 has an impressive amount of appeal for drivers. It is a powerful engine with good visibility. It also has a high safety rating.

saab key fob programming is important that you have two keys that work for your vehicle. It can be expensive to replace a key if you lose it.

How to replace the ignition Key in the Saab9-3

If your car's keys won't turn in the ignition, you need to replace it. This guide will guide you through how to do it on the Saab 9-3. You'll need a replacement key as well as a reprogrammable battery, and a new key-fob case.

Modern Saab models use a transponder instead of a traditional key to unlock the car and then start it. The reprogrammable batteries in the key-fob will eventually become worn out and aren't able to hold any charge. This is particularly the case if you use the same key in the same lock.

A professional locksmith can replace the battery quickly. You can also do it yourself if have the necessary tools and a little bit of patience. The first step involves separating the key-fob. This is accomplished by inserting a flathead screwdriver in the slot in the middle of the case. It is essential to be careful, as the plastic is very thin and can be damaged easily.

Once the case is open and you are able to prepare the new key by combining the lower half of the previous key with the transponder and banana on the new key. This will ensure that the new key is connected to the CIM correctly, which could make a huge difference when replacing the only key for your Saab 9-3.

How do you replace the ignition Key in a Saab 900

If you don't have two keys, you'll need to take off the dashboard and steering wheel in order to access the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, it is possible to remove the dashboard and trim pieces that surround the steering wheel. After the dashboard is removed, you can put a screwdriver into the opening in the back of the ignition switch and take it out.





The ignition cylinder is equipped with key locks that can stop the vehicle from starting if the key isn't in it. If the ignition switch on your 900 isn't working properly, check the key to determine if it's in the lock or is stuck in the barrel of the ignition. It is also recommended to rotate your keys and keep them clean to prevent bent.

Saab cars differ from other cars in that they don't use traditional keys made of metal. Instead, the car can recognize the electronic signals generated by the key fob by a specific chip inside it.

If you lose just one functioning key fob, your dealer will charge you the cost of replacing your computer module (also called the CIM). We can reprogram the EEPROM of your current computer to make it accept new keys, without the need for replacement. You'll save more than 50% off the price charged by the dealer! We call it the SAAB KEY PROGRAM. Find out more about it here!

How to Replace the Ignition Key on a Saab 9-5

The metal component of a classic Saab key is easy to copy, and it's also not much of a deterrent against theft of vehicles. The electronic component of the key-fob has an electronic chip that detects the car when the key is placed in the ignition switch.

Saab's anti-theft device has been relying on this technology for more than 10 years. It's not quite as effective as a physical door lock but it does make stealing your car more difficult. This is why every Saab owner should keep an extra key in their possession.

Most new Saabs come with two keys from the factory, but you can upgrade them at the dealer with a handheld computer known as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is NG 9-3 vehicles, that have more modern, more advanced features that require an ignition key.

The dealer will replace the CIM or TWICE module on those vehicles if all keys are lost, and charge you top dollar for the process. We can however reprogram the EEPROM in your existing computer and set it up to accept new keys without replacing the expensive modules.

How do I replace the ignition Key on a Saab XC90

If your SAAB 9-3 key fob begins having trouble turning the lock barrel it's possible that it's time to replace it. The procedure is quite simple and doesn't require you to visit an agent. You can do it at home, using a couple of basic tools.

It is first necessary to prepare the new keys. Before you start, disable the anti-theft by placing blocks underneath your rear wheels and engaging your handbrake. Put the key into the ignition and then turn the key to the "on" position. This will activate the accessories but will not start the engine. Repeat this 5 times, and then leave the key in the "on" position.

You'll need to purchase a new case for your key fob. They can be found at a variety of auto parts stores and are usually very affordable. You can get them without electronics based on the model.

To open the case, put an flathead screwdriver into the slot that is in the middle. Gently work it. When you've split the case, you will be able to access all the internal electronics. Use a flathead screwdriver to gently remove the electronics.