Electric accidents in the workplace are one of the most frequent causes of job-related fatalities. In fact, the Occupational Safety and Health Administration (OSHA) estimates that approximately 134 workers were killed in 2015 due to electrical accidents. Despite this, many of these accidents can be avoided with proper maintenance, regular inspection, and awareness of electrical hazards.Electrocutions and electric burns are the two most common injuries associated with electricity in the workplace. The extent of the damage depends on the duration and the voltage of the current. man down alarm devices Depending on the victim, he or she might suffer from a wide range of complications, including internal injuries, such as internal bleeding or tissue damage.These injuries are often serious, and they may not be immediately apparent to the victim. For instance, they can cause a brain injury or impaired brain function. Also, they can cause a loss of muscle control.Several factors can lead to electrical accidents, such as faulty wiring, water, improper grounding, and equipment malfunctions. To avoid these problems, all employees should be trained to use the correct breaker for each wire. lone worker monitor Electrical injuries can also be caused by wet working conditions. Workers must always ensure that the workplace is dry before starting work. Water is highly conductive and can make normally safe equipment hazardous.Other causes of electrical accidents include improperly grounded equipment and naked cords. To avoid these, all wiring and cords must be visible at all times. If any wires are uncovered, they can be sealed with electrical tape.